Infiniti parts from Dubai

Q50 and QX50. Similar names, different cars

The Q50 is a sedan and the QX50 is a crossover. According to Q50, the body code V37 is found in the catalogs. Among the variants of the Q50 there are versions with a gasoline V6 3.0 L VR30DDTT. If you need an engine or turbocharger, specify the full code and marking of the installed unit. For the engine assembly, coordinate the composition: turbines, nozzles, wiring and ancillary components units can go in separate positions. The box will need its code and drive information.

The early QX50 and the next generation J55 used different propulsion systems. For the J55, Infiniti specifies a 2.0-liter petrol VC-Turbo of the KR20 family. When looking for a radiator, CVT or engine on the QX50, it is especially important to check the generation. Even if the year of registration coincides with the year in the listing, the model year and the date of production may differ. On the radiator, ask for dimensions and photos of pipes, on the box - photos of markings and connectors.

After hitting the front of the Q50, it is convenient to split the request into exterior and interior parts. External - headlights, grille, cladding, hood and wings. Internal - amplifier, guides, cooling, tourniquets and fastenings of equipment. Compare the sentences on one list. The same price for two "front sets" says little if one is sold with headlights and modules, and the second without them.

QX60, QX70 and QX80. How to narrow down the search

For the QX60, the generation and year are important from the car’s documents and catalogue. Among the generations are the L50 and L51. When selecting a transmission, the power plant and drive are additionally specified. An old and a new car with the same name cannot be described in the same line as a QX60 box. If you are looking for a node on the already removed part, photograph the factory plate as a whole and the position of all connectors. The number on the casting sometimes refers to the body, so check the catalog designation of the node.

In the QX70 of the S51 family, specify the connection with the early FX designation and the date of production. For body parts, focus on the actual front kit, especially if the car has already been restored. For the engine, gearbox and drives, check the code and variant of the drive. On the doors and wings, check the condition of the edges, the mounting points of decorative linings and the composition of the order. If you need to choose a detail in color, apply a color code and a photo of the car in daylight.

For the QX80, it's helpful to let a generation know right away. On the cars of the previous Z62 series, a gasoline V8 5.6 liters is found, and the new generation has a different power plant. Indicate whether you need a ancillary components engine, a partial unit or a separate component. On the back door or trunk lid, write down what parts survived: camera, tourniquet, lock, electric drive, glass and moldings. This will help assess whether you can buy a bare panel and assemble it from your own components.

GCC, Europe and the United States. What's the difference?

For the Infiniti headlight from the UAE and the North American donor, the lighting functions, body marking, connector and installed modules are compared. The European car is additionally specified variant for left-hand or right-hand traffic, if the donor from the relevant market. For a mirror, check the camera, heating, folding and number of connectors. The bumper pay attention to the holes under the parktronics, washer nozzles, cameras and additional linings.

For control and multimedia units, differences may affect software variant and configuration. You need an OEM number and information about the machine for which the unit will be installed. Before purchase, check with the installer whether it is possible to encode a particular block and what operations will be required after installation. If the module was removed from the car after the impact, ask for photos of its location on the donor. Externally, the whole unit could be located next to the damaged bracket or connector.

In a warehouse in Dubai, a part from a car from another market can be sold. So ask the donor's VIN if it's available, and focus on the photo marking the particular instance. A large photo of the connector is useful, but compatibility on one form of the connector is not confirmed.

Inspection and frequent errors

In the used headlights look for traces of opening, moisture, damage to the fasteners and the body. If the headlight is declared in the collection, list the necessary blocks and specify whether they are included in the price. At the door you need photos of the inner panel and the bottom seam. From the outside, the door may look flat, although the landing areas or frame are deformed. For the engine, marking, donor information and available test results are useful. If it is impossible to start this should be taken into account when choosing a copy.

A common mistake is to search for the name of the body without a production date. The other is to buy a mirror by the color of the lid and detect the lack of the right camera. The third is to compare the new bare node and used kit at the total price, not taking into account what mounts and blocks will be needed additionally. Before comparing the estimates, write down the mandatory composition of the purchase and separate the parts that can be transferred from your car.

If the installer has already disassembled the car, ask him to sign the photos. For example, on one frame indicate a damaged camera bracket, on the other - a sticker with the headlight number. In a large order, this reduces the number of re-examinations and helps to link each photo to the desired order line.

Another example is looking for a radiator package for the QX60 or QX80. Start with a list of heat exchangers that are damaged, and compare photos of mounts and fittings. A car with a different power plant may have a different cooling scheme, although the outer frame looks familiar. If the supplier offers the package as a whole, check whether the diffuser, fan and pipes are included. If one heat exchanger is damaged, ask to rate it separately. Packaging is also compared by the actual composition: a frame with several radiators and a separate condenser are protected and fixed in different ways.

According to the interior details, check the color designation, side, configuration with buttons and the condition of the mounts. If you only need a decorative insert, check whether it can be separated from the panel and which locks should remain intact. A picture in bright light helps to see scratches and traces of repainting. For nodes associated with the electrics of seats and doors, marking, a photo of a plug and a list of functions are important.

Packaging and dispatch calculation

Optics are packaged with protection of protruding fasteners, body panels are fixed with protection of corners and edges. Heavy units are fixed on the base and close open holes. If the order is both motor and headlights, agree on a separate fixation and ask the size of the finished cargo seats. For units, the requirements of the carrier for the residues of liquids are specified in advance.

Air to Russia and Belarus - approximately 5-10 days and $12-20 per kg. The container to Moscow is about a month and $1.8-3.5 per kg. We confirm the exact price and term separately, Kazakhstan and other CIS countries calculate along the route. There is no minimum order value. The 10% service fee applies to the parts price. Packaging, transportation and customs are paid separately, without commission.

For parts of the Infiniti suspension, it is useful to attach a photo of the rack or lever in the established position. Lock the side and axis. For the shock absorber, compare the upper and lower attachment points, and if there is electronic control, the connection and its marking. This is especially important when the seller describes the donor only by the type of drive.

For the hood, check the place of mounting noise insulation and the condition of the lock zone. If the hood is sold with decorative inserts, check their condition and photograph all the mounts.

Checklist

• VIN, generation, release date, market and drive.
• Full marking of the part and confirmation of applicability by catalog.
• Photo of the condition, mounts, connectors, body and label.
• Completeness of headlamps, doors, engine or box in individual positions.
• Possibility of encoding and calibration if needed.
• Packaging parameters, route and full estimate.

Frequently asked questions

Official sources

• Infiniti – Catalogue of Applicability
• Infiniti — QX50
• Infiniti - original spare parts